MU-MIMO (Multiple-User Multiple In Multiple Out) does [math] to assist in directing signal to multiple clients at once via multipathing, which this reflector would fuck with the math of in (I think) a detrimental way. Regardless of its impact on that technology, higher-end wifi phy rates (the negotiated modulation rate between 2 stations, i.e. the wifi access point/router and your phone) would get shredded by having a reflector bouncing signal between the multiple antennas, forcing clients into artificially lower speeds for a [potential] marginal boost to gain.
This stopped being a helpful thing to do somewhere around the transition between wifi 4 and 5 (802.11n --> 802.11ac)
Then it’ll do literally exactly the same thing as above, but with a lower noise floor than otherwise. Whether lowering airtime contention (or, rather, lowering airtime contention for one station while not doing so for others, unless you’re talking about putting a layer of foil wallpaper up on a wall lmao) in exchange for all that is a net benefit for you, I couldn’t say. If it’s all wifi6 or higher though, I wouldn’t bother.
I remember going to a LAN that got its wifi from a local library via collander-boosting. Those were the days, and carrying around CRT monitors was sort of like exercise
wat
MU-MIMO (Multiple-User Multiple In Multiple Out) does [math] to assist in directing signal to multiple clients at once via multipathing, which this reflector would fuck with the math of in (I think) a detrimental way. Regardless of its impact on that technology, higher-end wifi phy rates (the negotiated modulation rate between 2 stations, i.e. the wifi access point/router and your phone) would get shredded by having a reflector bouncing signal between the multiple antennas, forcing clients into artificially lower speeds for a [potential] marginal boost to gain.
This stopped being a helpful thing to do somewhere around the transition between wifi 4 and 5 (802.11n --> 802.11ac)
What if I’m doing it to block signals from roughly half the 60 other APs with half a dozen devices each I have broadcasting nearby?
Then it’ll do literally exactly the same thing as above, but with a lower noise floor than otherwise. Whether lowering airtime contention (or, rather, lowering airtime contention for one station while not doing so for others, unless you’re talking about putting a layer of foil wallpaper up on a wall lmao) in exchange for all that is a net benefit for you, I couldn’t say. If it’s all wifi6 or higher though, I wouldn’t bother.
That is near exactly what I was considering, I live between an apartment building and a park, more or less.
I remember going to a LAN that got its wifi from a local library via collander-boosting. Those were the days, and carrying around CRT monitors was sort of like exercise
tbf i’d imagine a lot of people still have wifi 4