• 0 Posts
  • 12 Comments
Joined 1 year ago
cake
Cake day: June 14th, 2023

help-circle




  • Glad to help! Mixing colors shouldn’t be an issue, I have done it in the past, also have mixed PA and PA-CF in the past without issue. I bet you could even find a tent with a window and run a PTFE tube to a dry box outside the tent then you could pull the first color out and put the second one in without having to open the tent.

    Also, just to say it out loud I would definitely test the strength of the layer adhesion (especially between the colors since they might have different additives) for anything structural, especially if you might get injured if it fails, just to be double safe heh.

    Last, at least where I am, PA is significantly more expensive than ASA or PETG so might be worth looking at those for at least prototypes of the parts. For example, I typically use PLA to prototype ASA parts, has usually been fine to swap it out with just minor tolerance adjustments and it’s way cheaper to print 50 versions in PLA while I’m working out the design and then I print the final ones in ASA or whatever.


  • I have printed PA and tent idea will probably work but the other person is not kidding, PA is very finicky. Plan on printing PA directly from a dry box as even sitting on the printer will ruin a roll of it if you live somewhere with more than like 20% humidity outside, also make sure your dryer can reach 85c to dry out a spool of PA, even with a dry box I usually dry PA immediately before printing it. As others have mentioned, definitely consider ASA or PETG or maybe even PC (if that printer can print it) where you don’t really need the material properties of PA specifically.

    The tent will also probably be important for maintaining temperature of the chamber more than the smell, nylon doesn’t have a ton of odor anyway. You may need to put a blanket on it, you probably won’t need a chamber heater since nylon needs like a 65c bed or more, just make sure to pre-heat the chamber first by turning the bed on, I usually let mine warm for 20 min or more. It is alap important to keep the temps stable as nylon also warps easily which can cause it to pop off the bed while printing too So make sure the tent is sealed and try not to open it.

    Sounds like an interesting project though, best of luck!





  • So if I understand this right you will need to change the network on the port attached to the synology in your UniFi configuration or set the vlan tag in the synology OS, I would do the former. It sounds like you just added a second network/vlan to the existing interface which means you actually created a trunk and are getting the old network untagged and the new network with vlan tags which the synology is dropping. Synology OS also doesn’t really support trunked ports through the UI (even though it does support a port that only uses a vlan tag) so it’s much easier to just leave them untagged.



  • I have found the best way to cope is to surround yourself with people that understand and help you out when you fall short. Easier said than done for sure and it hasn’t always been that way for me but at this point I have a bunch of ADHD friends so they all get it, and my wife saves me usually, she is the best at that hah. Other than that I have been just leaning into it lately, for example find a job that has a lot of tasks that work well with your brain, choose wisely.

    I also treat my attention as a privilege that I can give people and not something someone can demand. I don’t phrase it that way to be egotistical, it’s just that my attention and focus is fleeting sometimes as it is so I need to defend it in that way to have any at all. This is also harder said than done but it’s also not too difficult, most people are understanding when you say “can I get back to you in 30 min when I’m done with I am doing” or “let’s put time on the calendar to work on that tomorrow” it turns out.

    Along this same line I also treat notifications everywhere as an opt-in activity, everything gets denied and I only let the most important ones through focus modes (I have an iPhone) that I actually need to receive and this includes all phone calls on all mediums. The only people that get let through focus modes are those that understand the gravity of interruptions on my brain (well and my parents because they are great hah).

    Well that was longer than I thought it would be but the short version is that you have to try to construct a situation for yourself that works with your brain and not against it, and it’s a long journey but you have to keep iterating on it like you have been.

    I hope some of that helps!