so it seems that without any config, the traffic passes from wlan1 to wlan0’s network flawlessly; but traffic from wlan0 network stops at the Android device, even with iptables -P FORWARD ACCEPT, so I’m clueless on what to do next

how could I set up NAT like this ? thanks

ip r

default via 192.168.15.1 dev enp3s0 proto dhcp src 192.168.15.32 metric 100
192.168.15.0/24 dev enp3s0 proto kernel scope link src 192.168.15.32 metric 100
192.168.38.0/24 via 192.168.15.21 dev enp3s0    

tyvm

Another section of the log when this happened:

Aug 15 18:00:48 arch kwin_wayland[3328]: This plugin does not support raise()
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: 0x2: GL_INVALID_OPERATION in glDrawBuffers(unsupported buffer GL_BACK_LEFT)
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: 0x2: GL_INVALID_OPERATION in glDrawBuffers(unsupported buffer GL_BACK_LEFT)
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: 0x2: GL_INVALID_OPERATION in glDrawBuffers(unsupported buffer GL_BACK_LEFT)
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: 0x2: GL_INVALID_VALUE in glTexStorage2D(width, height or depth < 1)
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: Invalid framebuffer status:  "GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT"
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: 0x2: GL_INVALID_OPERATION in glBindFramebuffer(non-gen name)
Aug 15 18:00:48 arch kwin_wayland[3328]: kwin_scene_opengl: 0x2: GL_INVALID_FRAMEBUFFER_OPERATION in glClear(incomplete framebuffer)

autistic fixation with IPV6

tyvm

seems to be working, even with some 404s returned

/var/lib/pacman/sync/multilib.db.part 100%[===================================================================================================================>] 137.53K --.-KB/s in 0.007s

2024-08-14 11:06:10 (19.4 MB/s) - ‘/var/lib/pacman/sync/multilib.db.part’ saved [140827/140827]

–2024-08-14 11:06:10-- https://mirror.osbeck.com/archlinux/multilib/os/x86_64/multilib.db.sig Loaded CA certificate ‘/etc/ssl/certs/ca-certificates.crt’ Resolving mirror.osbeck.com (mirror.osbeck.com)… 2606:4700:20::6819:5e05, 2606:4700:20::ac43:6136, 2606:4700:20::6819:5f05 Connecting to mirror.osbeck.com (mirror.osbeck.com)|2606:4700:20::6819:5e05|:443… connected. HTTP request sent, awaiting response… 404 not found 2024-08-14 11:06:10 ERROR 404: not found.

It seems that a namespace only has access to process that originates inside itself

systemctl --user list-units 
Failed to connect to bus: No medium found             

as we can see, the same user doesn’t have access to other processes so we would need to duplicate every process above the namespace until we could acess the media

would duplicate of everything - pulsewire, dbus, etc - even work ?

Relevant

you install program A, it needs and installs libpotato then later you install program B that depends on libfries, and libfries depends on libpotato, however since you already have libpotato installed, only program B and libfries are installed The intelligence behind this is called a package manager

In windows when you install something, it usually installs itself as a standalone thing and complains/reaks when dependencies are not met - e.g having to install Visual C++ 2005-202x for games, JRE for java programs etc

instead of making you install everything that you need to run something complex, the package manager does this for you and keep tracks of where files are

and each package manager/distribution has an idea of where some files be stored

You can freely manipulate NTFS in Linux. Just make sure your distribution has, after kernel >=5.15, enabled it, otherwise you may need to install the ntfs-eg driver. Other than that, Ach Wiki has info that may help you on any distro:

https://wiki.archlinux.org/title/NTFS

I have done something similar to what you want to do, just needed the ntfs-3g driver installed and “Disks” (gnome disks) application would mount/read/write the disks as usual

You can configure this behavior for CLI, and by proxy could run GUI programs that require elevation through the CLI:

https://wiki.archlinux.org/title/Sudo#Using_visudo

Defaults passwd_timeout=0(avoids long running process/updates to timeout waiting for sudo password)

Defaults timestamp_type=global (This makes password typing and it’s expiry valid for ALL terminals, so you don’t need to type sudo’s password for everything you open after)

Defaults timestamp_timeout=10(change to any amount of minutes you wish)

The last one may be the difference between having to type the password every 5 minutes versus 1-2 times a day. Make sure you take security implications into account.

Timeshift, make sure to “include hidden files” to recover any configuration for desktop environments

After a few mess ups, you may find yourself not needing to backup everything, only the file(s) that messed up, and that’s still a good thing to have Timeshift for

For those who use Wayland and autostart, don’t forget to edit

/etc/sddm.conf.d/kde_settings.conf

from KDE5: Session=plasmawayland

to Plasma6: Session=plasma

to confirm the exact name, check what is available under /usr/share/wayland-sessions/

if you’re stuck, try pacman -Q | grep -i kde and pacman -Q | grep -i plasma and remove everything related, then fresh install plasma-meta or plasma group and it should work